Adipotide supports adipose tissue signaling and metabolic research focused on targeted fat regulation pathways. Adipotide is a synthetic peptide studied for its ability to selectively interact with receptors expressed in adipose tissue vasculature, making it a compound of interest in research examining fat mass reduction and body composition signaling. Formulated with premium ingredients and supported by rigorous laboratory testing, Adipotide is intended for controlled research applications.
Adipotide is designed to target prohibitin receptors found on the blood vessels supplying white adipose tissue. Research has explored how this targeted interaction may influence adipose tissue viability without broadly affecting surrounding tissues. Because adipose tissue regulation plays a central role in metabolic health and energy balance, Adipotide has become a subject of interest in fat loss and metabolic research models.
In laboratory studies, Adipotide has been examined for its involvement in pathways associated with adipose tissue apoptosis, reduced fat mass signaling, and changes in metabolic efficiency. Research models have demonstrated Adipotide’s ability to influence fat-specific pathways, positioning it as a compound of interest in studies focused on targeted adipose reduction rather than generalized metabolic stimulation.
Additional research has explored Adipotide’s relevance in body recomposition and metabolic regulation studies. While the precise mechanisms continue to be investigated, findings suggest that Adipotide provides a unique research approach to studying selective adipose tissue targeting and fat-related biological processes.
The primary concern for peptide researchers today is product purity. Nord-sci guarantees our product purity by performing independent testing of our products and providing those certifications for our customers in our product descriptions.
THIS PRODUCT IS NOT INTENDED TO TREAT, CURE OR DIAGNOSE ANY CONDITION OR DISEASE AND IS NOT FOR HUMAN CONSUMPTION. ALL PRODUCTS OFFERED ARE INTENDED FOR LABORATORY RESEARCH USE ONLY.
All products are produced using lyophilization (freeze-drying), a preservation method that allows peptides to remain fully stable during shipping for approximately 3-4 months. Once a peptide has been reconstituted with bacteriostatic water, it must be refrigerated to maintain integrity. After reconstitution, peptides typically remain stable for up to 30 days when stored properly.
Lyophilization, also referred to as cryodesiccation, is a specialized dehydration process in which peptides are first frozen and then exposed to a low-pressure environment. This causes the water within the vial to transition directly from a solid to a vapor (sublimation), leaving behind a dry, crystalline white material known as a lyophilized peptide. In this powdered form, peptides may be safely stored at room temperature until they are ready to be reconstituted with bacteriostatic water.
After delivery, peptides should be protected from heat and light. If use is expected within the near future (whether days, weeks, or a few months) refrigerated storage below 4°C (39°F) is generally sufficient. Lyophilized peptides are commonly stable at room temperature for several weeks or longer, making short-term ambient storage acceptable when use is anticipated within that timeframe.
For extended storage, ranging from several months to multiple years, freezing is strongly recommended. Storage at -80°C (-112°F) offers optimal long-term stability and helps preserve peptide structure and quality over time.
For more detailed guidance on peptide handling and storage best practices, please refer to the resource below:
Adipotide is a synthetic chimeric peptide constructed from a cysteine-containing recognition motif, a glycine-glycine linker, and an all-D-amino-acid domain. It is evaluated in laboratory settings through analytical chemistry, peptide-characterization methods, binding assays, and controlled cell-based research models.
The compound is supplied in a 10mg vial as lyophilized research material. It is not manufactured or offered as a drug, dietary supplement, food, cosmetic, or consumer product.
Adipotide (10mg) – Research Specifications:
| Compound | Adipotide |
| Alternate Name | FTPP; Prohibitin-Targeting Peptide |
| Quantity | 10mg per vial |
| Compound Type | Synthetic chimeric peptidomimetic |
| CAS Number | 859216-15-2 |
| PubChem CID | 163360068 |
| Reference Sequence | CKGGRAKDC-GG-D(KLAKLAK)₂ |
| Reference Molecular Formula | C₁₁₁H₂₀₆N₃₆O₂₈S₂ |
| Reference Molecular Weight | 2557.2 g/mol |
| Form | Lyophilized powder |
| Purity and Identity | Refer to the lot-specific Certificate of Analysis |
| Storage Conditions | Store sealed and protected from heat, light, and moisture; follow the product label and COA |
| Research Use Only | Not for human or animal consumption or in vivo use |
The listed formula and molecular weight correspond to the deposited PubChem form. Structural state, counterion content, and other lot-specific variables should be confirmed using the applicable COA.
Adipotide is a laboratory research compound consisting of multiple structural regions within a single peptide construct. Its reference sequence includes the cysteine-flanked motif CKGGRAKDC, a glycine-glycine linker, and the D-amino-acid sequence D(KLAKLAK)₂.
Laboratory work involving Adipotide may examine peptide identity, structural configuration, analytical purity, receptor-associated binding, and assay behavior under controlled experimental conditions. These studies require defined controls, documented materials, and validated analytical procedures.
Differences in oxidation state, counterion content, peptide concentration, and analytical methodology can affect reported specifications. Researchers should use the lot-specific COA as the controlling document for experimental planning and recordkeeping.
Important Research Notice: NordSci research materials are accompanied by lot-specific analytical documentation for laboratory verification and traceability.
THIS PRODUCT IS INTENDED EXCLUSIVELY FOR LABORATORY RESEARCH. NOT FOR HUMAN OR ANIMAL CONSUMPTION. NOT FOR DIAGNOSTIC, THERAPEUTIC, VETERINARY, FOOD, COSMETIC, OR SUPPLEMENT USE.
Adipotide may be evaluated through laboratory methods used to characterize peptide identity, composition, and purity. Applicable methods and acceptance criteria should be documented for each research program.
Controlled in vitro assays may use Adipotide when examining peptide-binding behavior involving prohibitin-associated experimental systems. Results should be limited to the specific model and conditions tested.
Researchers may compare individual structural regions of Adipotide with modified constructs, isolated sequences, or appropriate controls to examine relationships between peptide structure and measured assay activity.
Adipotide may be used during the development, qualification, or validation of laboratory procedures involving chromatography, mass spectrometry, peptide detection, or related analytical workflows.
Adipotide (10mg) should be handled only by qualified laboratory personnel using documented procedures for synthetic peptide research materials. Researchers should use appropriate personal protective equipment and prevent unintended ingestion, inhalation, skin contact, or environmental release.
Experimental records should identify the product name, lot number, storage conditions, preparation date, analytical method, controls, and other variables required for traceability and reproducibility.
Protocol Design Considerations: Assay selection, sample preparation, concentration range, controls, equipment calibration, and acceptance criteria should be established through a laboratory-approved protocol. No dosing, injection, administration, or consumer-use guidance is provided.
Note: This information is provided exclusively for laboratory reference. Research must be conducted by qualified personnel in appropriately controlled facilities.
Lot-specific Certificates of Analysis provide documentation associated with the identity and analytical evaluation of NordSci research materials. Depending on the applicable lot and testing program, documentation may include chromatographic purity data, mass-spectrometry identity results, appearance, and other reported specifications.
Researchers should review the corresponding COA before beginning an experiment and retain it with the applicable laboratory records. COA results apply only to the identified lot and should not be generalized to other batches.
NordSci Peptides supplies Adipotide (10mg) exclusively as a laboratory research material. Qualified laboratories should review the product specifications, lot-specific COA, institutional requirements, and applicable regulations before purchasing or using the compound.
IMPORTANT: Adipotide (10mg) is not approved for human or animal use. It is not a drug, dietary supplement, food, cosmetic, or veterinary product. The purchaser is responsible for lawful acquisition, storage, handling, documentation, and disposal.
